Bulk fluid flow → Useful heat

Matrix context

D = disequilibrium row · C = coupling family column. A cell reads the state of the atlas for that pair.

D.10 × C.09 · Bulk fluid flow × Caloric (magneto/electro/elasto)family: Caloric (magneto/electro/elasto)

Steps

1. 01
   Bulk fluid flow —drives→ Flow-induced vibrationestablishedclaim record

   kinetic → mechanical · loss to thermal

   • a bluff or flexible body in the stream at a Reynolds number where vortex shedding locks to a structural mode

   bulk flow required

   refs [1]
2. 02
   Flow-induced vibration —produces→ Mechanical vibrationestablishedclaim record

   mechanical → mechanical

   refs [1]
3. 03
   Mechanical vibration —drives→ Elastic deformationestablishedclaim record

   mechanical → mechanical · loss to thermal

   • cyclic deformation of an elastic member (a cantilever
   • a plate
   • a sheet) by base or inertial excitation; operation at a structural resonance amplifies the deformation but is not required

   solid

   refs [2] [3] [4]
4. 04
   Elastic deformation —produces→ Mechanical stress or strainestablishedclaim record

   mechanical → mechanical

   • the deformed member carries a cyclic stress or strain state that can drive a stress-driven conversion (flexoelectric
   • elastocaloric
   • piezoelectric)

   refs [5] [2]
5. 05
   Mechanical stress or strain —drives→ Elastocaloric effectreplicatedclaim record

   mechanical → thermal

   • stress large enough to drive the martensitic transformation of a shape-memory alloy

   solid

   refs [6] [7]
6. 06
   Elastocaloric effect —converts into→ Useful heatdemonstratedclaim record

   thermal → thermal · loss to thermal

   refs [6]

Evidence for the complete composition · 0

No source on record for this exact composition. The sources below support the individual steps, not the route as a whole.

Evidence for the constituent relations · 7

1. [1]
   H. B. Radousky, H. Liang. Energy harvesting: an integrated view of materials, devices and applications (2012)

   Nanotechnology 23, 502001 · doi:10.1088/0957-4484/23/50/502001 · crossref ✓ 2026-09-19 · record
2. [2]
   A. Erturk, D. J. Inman. Piezoelectric Energy Harvesting (2011)

   Wiley · doi:10.1002/9781119991151 · crossref ✓ 2026-09-19 · record
3. [3]
   S. Yang et al.. Performance enhancement of flexoelectric energy harvester by structural design (2025)

   International Journal of Smart and Nano Materials 16(4), 908–928 · doi:10.1080/19475411.2025.2592544 · record
4. [4]
   A. Kumar et al.. Vibration induced refrigeration using ferroelectric materials (2019)

   Scientific Reports 9, 3922 · doi:10.1038/s41598-019-40159-8 · record
5. [5]
   J. F. Nye. Physical Properties of Crystals: Their Representation by Tensors and Matrices (1985)

   Oxford University Press · book, no DOI · record
6. [6]
   J. Tušek et al.. A regenerative elastocaloric heat pump (2016)

   Nature Energy 1, 16134 · doi:10.1038/nenergy.2016.134 · crossref ✓ 2026-09-19 · record
7. [7]
   X. Moya, S. Kar-Narayan, N. D. Mathur. Caloric materials near ferroic phase transitions (2014)

   Nature Materials 13, 439–450 · doi:10.1038/nmat3951 · crossref ✓ 2026-09-19 · record