Pressure gradient → Electrical work
Pressure gradientElastic deformationMechanical stress or strainElastocaloric effectTemporal temperature changePyroelectric effectSeparated surface chargeElectrical work
Epistemic state of the route
- known constituent relations
- 7 / 7 established or replicated · weakest constituent replicated
- constituent maturity floor
- K4 · experimentally observed
- search for this exact route
- Not assessed — complete composition not searched.
- recorded-pathway overlap
- shares its closing relations with Pyroelectric harvester · 3/7 relations shared
- route-level evidence
- 0 sources for the complete composition · 8 cited by the constituent steps
- boundaries and interfaces
- BOUNDARY compatible · no region transition
Explorematrix context · physics checks · steps · route evidence · constituent evidence · cite
Matrix context
D = disequilibrium row · C = coupling family column. A cell reads the state of the atlas for that pair.
D.02 × C.09 · Pressure gradient × Caloric (magneto/electro/elasto)family: Caloric (magneto/electro/elasto)D.02 × C.04 · Pressure gradient × Pyroelectricfamily: Pyroelectric
Typed bounds on this route
Every limit the atlas holds for this route, as constraint records: reached through bounded_by claims on the route's own entities. Hard bounds (an upper bound or a formula) decide the thermodynamic-bound check above; benchmarks, constitutive relations and resource limits are listed and never decisive. No prose limit exists anywhere (pass 42).
- Carnot limit · formula-bound · hard, applies to this routeη ≤ 1 − T_c/T_h for any heat engine between reservoirs at T_h and T_c
Steps
- 01mechanical → mechanical
- pressure acting on a diaphragm or shell
solidrefs [1] - 02mechanical → mechanical
- the deformed member carries a cyclic stress or strain state that can drive a stress-driven conversion (flexoelectric
- elastocaloric
- piezoelectric)
refs [1] [2] - 03mechanical → thermal
- stress large enough to drive the martensitic transformation of a shape-memory alloy
solidrefs [3] [4] - 04thermal → thermalrefs [3] [4]
- 05thermal → electrical · loss to thermalΔP = p · ΔT · pyroelectric coefficient p [C/(m^2 K)]ΔT is the material's temperature change between two times, not a spatial temperature difference.
- the temperature of the polar material must change in time (dT/dt ≠ 0); a static spatial temperature gradient alone produces no pyroelectric current
- the material must be below its Curie temperature
solid · ferroelectric required · transient onlyRe-spelled in loop-3 pass 30 from the temperature-gradient row, where it had sat as an indexing compromise, onto the temporal temperature change that is its physical driver.refs [5] [6] [7] - 06electrical → electricalrefs [5]
- 07electrical → electrical · loss to thermal
- electrodes on the charged surfaces connected through a load
refs [8]
Evidence for the complete composition · 0
No source on record for this exact composition. The sources below support the individual steps, not the route as a whole.
Evidence for the constituent relations · 8
- [1]J. F. Nye. Physical Properties of Crystals: Their Representation by Tensors and Matrices (1985)
- [2]A. Erturk, D. J. Inman. Piezoelectric Energy Harvesting (2011)
- [3]J. Tušek et al.. A regenerative elastocaloric heat pump (2016)
- [4]X. Moya, S. Kar-Narayan, N. D. Mathur. Caloric materials near ferroic phase transitions (2014)
- [5]S. B. Lang. Pyroelectricity: from ancient curiosity to modern imaging tool (2005)
- [6]R. W. Whatmore. Pyroelectric devices and materials (1986)
- [7]C. R. Bowen et al.. Pyroelectric materials and devices for energy harvesting applications (2014)
- [8]H. B. Radousky, H. Liang. Energy harvesting: an integrated view of materials, devices and applications (2012)
Cite this route
Physical Transformation Atlas (2026). route p-ff256006c7: Pressure gradient → Elastic deformation → Mechanical stress or strain → Elastocaloric effect → Temporal temperature change → Pyroelectric effect → Separated surface charge → Electrical work. Dataset revision rbfbfcbb70e57 (hash of the canonical data). https://physical-transformation-atlas.wldud5192.workers.dev/path/ff256006c7
Ids and matrix addresses are stable across revisions; the revision hash identifies the exact canonical files the record was compiled from and is meta.data_hash in every /api export. Reuse terms: see the license field in any export.